Show Users - D-Link DXS-1210-12TC Reference Manual

By default, the state is enabled.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display information about the http server status.
Example
This example shows how to display information about the http server status.
Switch#show ip http server
ip http server state :
Switch#
5-14

show users

This command is used to display information about the active lines on the Switch.
show users
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displays information about the active lines on the Switch.
Example
This example shows how to display all session information.
Switch# show users
ID Type
-------------------------------------------------------------------------------
0 * console admin
Total Entries: 1
Switch#
DXS-1210 Series Smart Managed Switch CLI Reference Guide
enable
User-Name Privilege Login-Time
15 4S
62
IP address