D-Link DXS-1210-12TC Reference Manual page 101

11-2 debug show cpu utilization
This command is used to display the total CPU utilization.
debug show cpu utilization
Parameters
None.
Default
None.
Command Mode
Privileged EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
Use this command to display the information about CPU utilization.
Example
This example shows how to display the CPU utilization per process information.
Switch#debug show cpu utilization
Five seconds -
Process Name
-----------------
OS_UTIL
bcmCNTR.0
FAN_Pooling
bcmLINK.0
GBIC_Pooling
bcmL2X.0
HISR1
Switch#
DXS-1210 Series Smart Managed Switch CLI Reference Guide
12 %
5Sec
------
89 %
2 %
2 %
1 %
1 %
1 %
1 %
98