Level: 12.
Usage Guideline
This command is used to enter the Global Configuration Mode.
Example
This example shows how to enter into Global Configuration Mode.
Switch# configure terminal
Switch(config)#
2-3 logout
This command is used to close an active terminal session by logging off the Switch.
logout
Parameters
None.
Default
None.
Command Mode
User EXEC Mode.
Privilege EXEC Mode.
Command Default Level
Level:1.
Usage Guideline
Use this command to close an active terminal session by logging out of the device.
Example
This example shows how to logout
Switch# disable
Switch# logout
2-4 end
This command is used to end the current configuration mode and return to the highest mode in the
CLI mode hierarchy which is either the User EXEC Mode or the Privileged EXEC Mode.
end
Parameters
None.
Default
None.
Command Mode
DXS-1210 Series Smart Managed Switch CLI Reference Guide
12