dot3StatsExcessiveCollisions
dot3StatsInternalMacTransmitErrors : 0
dot3StatsCarrierSenseErrors
dot3StatsInternalMacReceiveErrors
linkChange
Switch#
21-6
This command is used to display the interface information.
show interfaces [INTERFACE-ID [- | ,]]
Parameters
INTERFACE-ID
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
If no interfaceis specified, all existing physical ports will be displayed.
Example
This example shows how to display the interface information for eth1/0/1.
DXS-1210 Series Smart Managed Switch CLI Reference Guide
show interfaces
(Optional) Specifies that the interface can be a physical port, VLAN, or
other.
: 0
: 0
: 0
: 1
162