D-Link DXS-1210-12TC Reference Manual page 180

Dxs-1210 series l2 10 gigabit ethernet switch
Hide thumbs Also See for DXS-1210-12TC:
Table of Contents

Advertisement

all
INTERFACE-ID
,
-
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
If this command is issued without the interface keyword, all neighboring information on all interfaces
will be cleared.
Example
This example shows how to clear all neighboring information on all interfaces.
Switch# clear lldp table all
Switch#
This example shows how to clear neighboring information on interface.
Switch# clear lldp table interface ethernet 1/0/1
Switch#
25-3
This command is used to specify which optional type-length-value settings (TLVs) in the IEEE 802.1
Organizationally Specific TLV set will be transmitted and encapsulated in the LLDPDUs and sent to
neighbor devices. Use the no form of this commandto disable the transmissionof TLVs.
lldp dot1-tlv-select {port-vlan | vlan-name [VLAN-ID [, | -]] | protocol-identity [PROTOCOL-
NAME]}
no lldp dot1-tlv-select {port-vlan | vlan-name [VLAN-ID [, | -]] | protocol-identity [PROTOCOL-
NAME]}
Parameters
port-vlan
vlan-name
VLAN-ID [, | -]
DXS-1210 Series Smart Managed Switch CLI Reference Guide
Specifies to clear LLDP neighboring information for all interfaces.
Specifies the interface's ID.
(Optional) Specifies a series of physical interfaces. No spacesbefore
and after the comma.
(Optional) Specifies a range of physical interfaces. No spaces before
and after the hyphen.
lldp dot1-tlv-select
Specifies the port VLAN ID TLV to send. The Port VLAN ID TLV is an
optional fixed length TLV that allows a VLAN bridge port to advertise
the port's VLAN identifier (PVID) that will be associated with untagged
or priority tagged frames.
Specifies the VLAN name TLV to send. The VLAN name TLV is an
optional TLV that allows an IEEE 802.1Q-compatible IEEE 802 LAN
station to advertise the assigned name of any VLAN with which it is
configured.
(Optional) Specifies the ID of the VLAN in the VLAN name TLV. The
VLAN ID range is 1 to 4094. Separate nonconsecutive VLAN ID with a
comma. Use a hyphen to designate a range of VLAN IDs. If no VLAN
177

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dxs-1210-12scDxs-1210-10tsDxs-1210-16tc

Table of Contents