Show Ipv6 Mld Snooping Mrouter - D-Link DXS-1210-12TC Reference Manual

Usage Guideline
Use this command to display MLD group information by command.
Example
This example shows how to display MLD snooping group information.
Switch# show ipv6 mld snooping groups
MLD Snooping Connected Group Membership:
VLAN ID
-------
1
1
1
Total Entries: 3
Switch#
28-14
This command is used to display MLD snooping multicast router port information automatically
learned or manually configured on the Switch.
show ipv6 mld snooping mrouter [vlan VLAN-ID]
Parameters
vlan VLAN-ID
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display dynamically learned or manually configured multicast router interfaces.
Example
This example shows how to display MLD snooping multicast router information.
DXS-1210 Series Smart Managed Switch CLI Reference Guide
Group address
-------------------
FF1E::
FF1E::3
FF1E::4

show ipv6 mld snooping mrouter

(Optional) Specifies the VLAN. If no VLAN is specified, MLD snooping
Multicast Router Information on all VLANs will be displayed.
Source address
-------------------
*
*
3620:110:1::3a2b
222
Exp(sec) Interface
-------- ---------
258 2/0/7
258 2/0/7
258 2/0/7