32-7
This command is used to display the powersaving configuration information.
show power-saving [dim-led] [port-shutdown] [hibernation] [eee [INTERFACE-ID[,|-]]]
Parameters
dim-led
port-shutdown
hibernation
eee
INTERFACE-ID
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
If no optional keywords were specified, all powersaving configuration information will be displayed.
Example
This example shows how to display all powersaving configuration information.
Switch#show power-saving
Function Version: 3.00
Scheduled Hibernation
State: Disable
Administrative Dim-LED
State: Disabled
Scheduled Dim-LED Power Saving
State: Disabled
Scheduled Port-shutdown Power Saving
State: Disabled
EEE_Enabled Ports
eth1/0/1
Switch#
DXS-1210 Series Smart Managed Switch CLI Reference Guide
show power-saving
(Optional) Specifies to display the dim LED state.
(Optional) Specifies to display the portshutdown state.
(Optional) Specifies to display the hibernation state.
(Optional) Specifies to display the EEE state.
(Optional) Specifies the output interface for the EEE.
power saving
256