D-Link DXS-1210-12TC Reference Manual page 178

neighbor
load-balance
sys-id
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
If a port-channel number is not specified, all port-channels will be displayed. If the channel, load-
balance and sys-id keywords are not specified with the show channel-group command, only
summary channel-group information will be displayed.
Example
This example shows how to display the detailed information of all port-channels.
DXS-1210 Series Smart Managed Switch CLI Reference Guide
(Optional) Specifies to display neighbor information.
(Optional) Specifies to display the load balance information.
(Optional) Specifies to display the system identifier that is being used
by LACP.
175