D-Link DXS-1210-12TC Reference Manual page 308

This example shows how the plain-text password is configured for the user "user1" in the SNMPv3
group public.
Switch# configure terminal
Switch(config)#snmp-server user user1 public v3 auth md5 authpassword priv
privpassword
Switch(config)#
This example shows how the MD5 digest string is used instead of the plain text password.
Switch# configure terminal
Switch(config)#snmp-server user user1 public v3 encrypted auth md5
00112233445566778899AABBCCDDEEFF
Switch(config)#
38-18
This command is used to create or modify a view entry. Use the no form of this command to remove a
specified SNMP view entry.
snmp-server view VIEW-NAME OID-TREE {included | excluded}
no snmp-server view VIEW-NAME
Parameters
VIEW-NAME
OID-TREE
included
excluded
Default
VIEW-NAME
Restricted
Restricted
Restricted
Restricted
Restricted
CommunityView
CommunityView
CommunityView
Command Mode
Global Configuration Mode.
Command Default Level
Level: 15.
DXS-1210 Series Smart Managed Switch CLI Reference Guide
snmp-server view
Specifies the name of the view entry. The valid length is 1 to 32
characters. The syntax is general string that does not allow spaces.
Specifies the object identifier of the ASN.1 sub-tree to be included or
excluded from the view. To identify the sub-tree, specify a text string
consisting of numbers, such as 1.3.6.2.4, or a word, such as system.
Use the asterisk (*) wildcard in a single sub-identifier to specify a sub-
tree family.
Specifies the sub-tree to be included in the SNMP view.
Specifies the sub-tree to be excluded from the SNMP view.
OID-TREE
1.3.6.1.2.1.1
1.3.6.1.2.1.11
1.3.6.1.6.3.10.2.1
1.3.6.1.6.3.11.2.1
1.3.6.1.6.3.15.1.1
1
1.3.6.1.6.3
1.3.6.1.6.3.1
View Type
Included
Included
Included
Included
Included
Included
Excluded
Included
305