D-Link DXS-1210-12TC Reference Manual page 375

lldp-med device
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display the voice VLAN configurations.
Example
This example shows how to display the voice VLAN global settings.
Switch# show voice vlan
Voice VLAN ID
Voice VLAN CoS
Aging Time
Member Ports
Dynamic Member Ports : eth1/0/1-1/0/3
Voice VLAN OUI:
OUI Address
----------------
00-01-E3-00-00-00
00-03-6B-00-00-00
00-09-6E-00-00-00
00-0F-E2-00-00-00
00-60-B9-00-00-00
00-D0-1E-00-00-00
00-E0-75-00-00-00
00-E0-BB-00-00-00
00-02-03-00-00-00
Total OUI: 9
Switch#
This example shows how to display the voice VLAN information of ports.
Switch# show voice vlan interface eth 1/0/1-5
Interface
------------
eth1/0/1
eth1/0/2
eth1/0/3
eth1/0/4
eth1/0/5
Switch#
This example shows how to display the learned voice devices on ports eth1/0/1-1/0/2.
DXS-1210 Series Smart Managed Switch CLI Reference Guide
(Optional) Specifies to display the voice devices learned by LLDP-
MED.
: 1000
: 7
: 30 minutes
: eth1/0/1-1/0/5
Mask
-----------------
FF-FF-FF-00-00-00
FF-FF-FF-00-00-00
FF-FF-FF-00-00-00
FF-FF-FF-00-00-00
FF-FF-FF-00-00-00
FF-FF-FF-00-00-00
FF-FF-FF-00-00-00
FF-FF-FF-00-00-00
FF-FF-FF-00-00-00
State Mode
---------- ------------
Enabled Auto/Tag
Enabled Manual
Enabled Manual
Enabled Auto/Untag
Disabled Manual
Description
-------------
Siemens
Cisco
Avaya
Huawei&3COM
NEC&Philips
Pingtel
Veritel
3COM
User1
372