D-Link DXS-1210-12TC Reference Manual page 58

By default, this option is enabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
This command enables the HTTP server function. The HTTPs access interface is separately
controlled by SSL commands.
Example
This example shows how to enable the HTTP server.
Switch# configure terminal
Switch(config)#ip http server
The SSL function will be set to disable.
Switch(config)#
5-3 ip http secure-server
This command is used to enable the HTTPS server. Use the ip http secure-server ssl-service-
policycommand to specify which SSL service policy is used for HTTPS. Use the no form of this
command todisable the HTTPS server function.
ip http secure-server [ssl-service-policy POLICY-NAME]
no ip http secure-server
Parameters
POLICY-NAME
Default
By default, this option is disabled.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
This command enables the HTTPS server function and uses the specified SSL service policy for
HTTPS.
Example
This example shows how to enable the HTTPS server function and use the service policy called "sp1"
for HTTPS.
Switch# configure terminal
Switch(config)#ip http secure-server ssl-service-policy sp1
Switch(config)#
DXS-1210 Series Smart Managed Switch CLI Reference Guide
(Optional) Specifies the SSL service policy name. Use this ssl-
service-policy keyword only if you have already declared an SSL
service policy using the ssl-service-policy command. When no
keywordis specified, a built-in local certificate will be used for HTTPS.
55