D-Link DXS-1210-12TC Reference Manual page 42

Dxs-1210 series l2 10 gigabit ethernet switch
Hide thumbs Also See for DXS-1210-12TC:
Table of Contents

Advertisement

4-8 ipv6 access-group
This command is used to specify the IPv6 accesslist to be applied to an interface. Use the no form of
this command to remove an IPv6 access list.
ipv6 access-group {NAME | NUMBER} [in]
no ipv6 access-group [NAME | NUMBER] [in]
Parameters
NAME
NUMBER
in
Default
None.
Command Mode
Interface Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
Only one access list of the same type can be applied to the same interface; but access lists of
different types can be applied to the same interface. The association of an access group with an
interface will consume the filtering entry resource in the switch controller. If the resource is insufficient
to commit the command, then an error message will be displayed.
There is a limitation on the number of port operator resources. If applying the command exhausts the
available port selectors, then an error message will be displayed.
Example
This example shows how to specify the IPv6 accesslist "ip6-control" as an IP access group for
eth3/0/3.
Switch# configure terminal
Switch(config)#interface eth 1/0/3
Switch(config-if)# ipv6 access-group ip6-control in
The remaining applicable IPv6 related access entries are 156
Switch(config-if)#
4-9 ipv6 access-list
This command is used to create or modify an IPv6 access list. This command will enter into IPv6
access-list configuration mode. Use the no form of this command to remove an IPv6 accesslist.
ipv6 access-list [extended] NAME [NUMBER]
no ipv6 access-list [extended] {NAME | NUMBER}
Parameters
extended
DXS-1210 Series Smart Managed Switch CLI Reference Guide
Specifies the name of the IPv6 accesslist to be applied.
Specifies the number of the IPv6 accesslist to be applied.
(Optional) Specifies that the IPv6 access list will be applied to check in
the ingress direction. If the direction is not specified, in is used.
(Optional) Specifies that without this option the IPv6 access list is a
standard IPv6 access list. When using the extended option, the IPv6
39

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dxs-1210-12scDxs-1210-10tsDxs-1210-16tc

Table of Contents