D-Link DXS-1210-12TC Reference Manual page 169

EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command displaysthe Switch's port connection status.
Example
This example shows how to display the Switch's port connection status.
Switch# show interfaces ethernet 1/0/1-8 status
Port
Type
-----------
---------
eth1/0/1
10GBASE-T
eth1/0/2
10GBASE-T
eth1/0/3
10GBASE-T
eth1/0/4
10GBASE-T
eth1/0/5
10GBASE-T
eth1/0/6
10GBASE-T
eth1/0/7
10GBASE-T
eth1/0/8
10GBASE-T
21-9 shutdown
This command is used to disable an interface. Use the no form of this command to enable an
interface.
shutdown
no shutdown
Parameters
None.
Default
By default, this option is no shutdown.
Command Mode
Interface Configuration Mode.
Command Default Level
Level: 12.
Usage Guideline
DXS-1210 Series Smart Managed Switch CLI Reference Guide
Status
--------------
Not-Connected
Not-Connected
Not-Connected
Not-Connected
Connected
Not-Connected
Not-Connected
Not-Connected
MAC Address
------------------
00-00-04-01-02-02
00-00-04-01-02-03
00-00-04-01-02-04
00-00-04-01-02-05
00-00-04-01-02-06
00-00-04-01-02-07
00-00-04-01-02-08
00-00-04-01-02-09
166
VLAN Duplex Speed
----- ---------- -----------
1 Auto Auto
1 Auto Auto
1 Auto Auto
1 Auto Auto
1 Auto-Full Auto-1000M
1 Auto Auto
1 Auto Auto
1 Auto Auto