D-Link DXS-1210-12TC Reference Manual page 69

Default
By default, the user name is admin, password is admin, and the privilege level is 15.
Command Mode
Global Configuration Mode.
Command Default Level
Level: 15.
Usage Guideline
This command creates user accounts with different access levels. When the user login with Level 1,
the user will be in the User EXEC Mode. The user needs to further use the enablecommand to enter
the Privileged EXEC Mode.
When the user login with a Level higher than or equal to 2, the user will directly enter the Privileged
EXEC Mode. Therefore, the Privileged EXEC Mode can be in Levels 2 to 15.
The user can specify the password in the encrypted form or in the plain-text form. If it is in the plain-
text form, but the service passwordencryptionoption is enabled, the password will be converted to the
encrypted form.
If the no username command is used without the user name specified, all users are removed.
By default, the user account is empty. When the user account is empty, the user will be directly in the
User EXEC Mode at Level 1. The user can further enter the Privileged EXEC Mode using the enable
command.
Example
This example shows how to create anadministrative username, called admin, and a password, called
"mypassword".
Switch# configure terminal
Switch(config)# username admin privilege 15 password 0 mypassword
Switch(config)#
This example shows how to remove the user account with the username admin.
Switch# configure terminal
Switch(config)# no username admin
Switch(config)#
5-19 show user-account
This command is used to display information about the user accounts created on the Switch.
show user-account
Parameters
None.
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
DXS-1210 Series Smart Managed Switch CLI Reference Guide
66