address
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display the current port security settings.
Example
This example shows how to display the port security settings of interfaces eth1/0/1 to eth1/0/3.
Switch# show port-security interface eth 1/0/1-3
Interface No.
Max No.
Curr No.
Violation Action : Protect
Violation Count
Security Mode
Admin State
Current State
Aging Time
Aging Type
Interface No.
Max No.
Curr No.
Violation Action : Protect
Violation Count
Security Mode
Admin State
Current State
Aging Time
Aging Type
Interface No.
Max No.
Curr No.
Violation Action : Protect
Violation Count
Security Mode
Admin State
Current State
Aging Time
Aging Type
Switch#
DXS-1210 Series Smart Managed Switch CLI Reference Guide
and after the hyphen.
Specifies to display all the secure MAC addresses, including both
configured and learned entries.
: eth1/0/1
: 32
: 0
: -
: DeleteOnTimeout
: Disabled
: -
: 0
: Absolute
: eth1/0/2
: 32
: 0
: -
: DeleteOnTimeout
: Disabled
: -
: 0
: Absolute
: eth1/0/3
: 32
: 0
: -
: DeleteOnTimeout
: Disabled
: -
: 0
: Absolute
245