Appendix B - Trap Entries
The following table lists all possible trap log entries and their corresponding meanings that will appear
in the switch.
802.1X
Trap Name
pnacAuthNotifyAuthSuccess
pnacAuthNotifyAuthFailure
DHCP Server Screen Prevention
Trap Name
dhcpSerScrAttackDetect
ErrDisable
Trap Name
errDisNotifyPortDisabledAssert
errDisNotifyPortDisabledClear
DXS-1210 Series Smart Managed Switch CLI Reference Guide
Description
The trap is sent when a host has successfully logged
in (passed 802.1X authentication).
Binding objects:
networkPortAuthPortNumber
(1)
(2) networkPortAuthVlan
(3) networkPortAuthMac
(4) networkPortAuthUserName
The trap is sent when a host failed to pass 802.1X
authentication(login failed).
Binding objects:
networkPortAuthPortNumber
(1)
(2) networkPortAuthVlan
(3) networkPortAuthMac
(4) networkPortAuthUserName
networkPortAuthFailReason
(5)
Description
When DHCP Server Screen is enabled, if the switch
received the forge DHCP Server packet, the switch
will trap the event if any attacking packet is received.
Binding objects:
(1) dhcpSerScrLogVlanID
(2) dhcpSerScrLogIPAddr
(3) dhcpSerScrLogMacAddr
(4) dhcpSerScrLogOccurrence
Description
The trap is sent when a port enters into error
disabled state.
Binding objects:
(1) errDisIfStatusPortIndex
(2) errDisIfStatusVlanIndex
(3) errDisPortReason
The trap is sent when a port loop restarts after the
interval time.
Binding objects:
(1) errDisIfStatusPortIndex
382
OID
1.3.6.1.4.1.1
71.10.139.1.
1.8.2.7.0.1
1.3.6.1.4.1.1
71.10.139.1.
1.8.2.7.0.2
OID
1.3.6.1.4.1.17
1.10.139.1.1.
8.7.3.0.1
OID
1.3.6.1.4.1.1
71.10.139.1.
1.2.13.8.0.1
1.3.6.1.4.1.1
71.10.139.1.
1.2.13.8.0.2