D-Link DXS-1210-12TC Reference Manual page 331

Switch# configure terminal
Switch(config)# surveillance vlan qos 7
Switch(config)#
41-6
This command is used to display the surveillance VLAN configurations.
show surveillance vlan [ interface [ INTERFACE-ID [, | -] ] ]
show surveillance vlan device [ interface [ INTERFACE-ID [, | -] ] ]
Parameters
device
interface
INTERFACE-ID
,
-
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Use this command to display the surveillance VLAN configurations.
The show surveillance vlancommand is used to display the surveillance VLAN global configurations.
The show surveillance vlan interface command is used to display the surveillance vlan
configurations on the interfaces.
The show surveillance vlan device command is used to display the surveillance device discovered
by its OUI.
Example
This example shows how to displays the surveillance VLAN global settings.
DXS-1210 Series Smart Managed Switch CLI Reference Guide
show surveillance vlan
Specifies to display the learned surveillance devices information
(Optional) Specifies to display surveillance VLAN information of ports.
(Optional) Specifies the port to be displayed.
(Optional) Specifies a series of interfaces, or separate a range of
interfaces from a previous range. No space is allowed before and after
the comma.
(Optional) Specifies a range of interfaces. No space is allowed before
and after the hyphen.
328