D-Link DXS-1210-12TC Reference Manual page 147

Switch# show mac-address-table learning interface ethernet 1/0/1-10
Port
------------------------
eth1/0/1
eth1/0/2
eth1/0/3
eth1/0/4
eth1/0/5
eth1/0/6
eth1/0/7
eth1/0/8
eth1/0/9
eth1/0/10
Switch#
19-10
This command is used to display the filtering mode for handling multicast packets that are received on
an interface.
show multicast filtering-mode [interface VLAN-ID]
Parameters
interfaceVLAN-ID
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
Example
This example shows how to display the multicast filtering mode configuration for all VLANs.
Switch#show multicast filtering-mode
Interface
--------------------------------
default
Total Entries: 1
Switch#
DXS-1210 Series Smart Managed Switch CLI Reference Guide
show multicast filtering-mode
(Optional) Specifies the VLAN to display.
State
--------
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Layer 2 Multicast Filtering Mode
--------------------------------
forward-unregistered
144