D-Link DXS-1210-12TC Reference Manual page 325

broadcast
multicast
unicast
Default
None.
Command Mode
EXEC Mode or Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
If the interface ID is not specified, all interfaces configurations will be displayed.
If the packet type is not specified, all types of storm control settings will be displayed.
Example
This example shows how to displaythe current broadcast storm control settings.
Switch# show storm-control interface range ethernet 1/0/1-1/0/6 broadcast
Polling Interval
Trap
Interface
-----------------------------------------------------------
eth1/0/1
eth1/0/2
eth1/0/3
eth1/0/4
eth1/0/5
eth1/0/6
Total Entries: 6
Switch#
This example shows how to display all interface settings for the range from port 1/0/1 to port 1/0/2.
Switch# show storm-control interface eth1/0/1-2
Polling Interval
Trap
Interface
---------------------- --------------------------------------------
eth1/0/1
eth1/0/1
eth1/0/1
eth1/0/2
eth1/0/2
eth1/0/2
Total Entries: 6
Switch#
DXS-1210 Series Smart Managed Switch CLI Reference Guide
and after the hyphen.
Specifies to display the current broadcast storm setting.
Specifies to display the current multicast storm setting.
Specifies to display the current unicast(DLF) storm setting.
: 15 sec
: Disabled
Storm Action
Broadcast Drop
Broadcast Drop
Broadcast Drop
Broadcast Shutdown
Broadcast None
Broadcast None
: 15 sec
: Disabled
Storm
Broadcast Drop
Multicast Drop
Unicast Drop
Broadcast Shutdown
Multicast Shutdown
Unicast Shutdown
Shutdown Retries
Threshold
500/300 pps
80/64 %
80/64 %
60/50 %
60000/50000 kbps
-
Shutdown Retries
Action Threshold
80/64 %
80/64 %
80/64 %
500/300 pps
500/300 pps
500/300 pps
322
: Infinite
Current State
200 pps Forwarding
20 % Forwarding
70 % Dropped
20 % Forwarding
2000 kbps Forwarding
- Inactive
: Infinite
Current State
50% Forwarding
50% Forwarding
50% Forwarding
- Error Disabled
- Error Disabled
- Error Disabled