Switch# show startup-config
#------------------------------------------------------------------------
#
#
#
#
#------------------------------------------------------------------------
# Basic
# ------------------------------------------------------------
# LACP
configure terminal
lacp system-priority 32768
port-channel load-balance src-mac
interface ethernet 1/0/1
lacp port-priority 32768
lacp timeout short
exit
interface ethernet 1/0/2
lacp port-priority 32768
lacp timeout short
exit
interface ethernet 1/0/3
lacp port-priority 32768
lacp timeout short
exit
interface ethernet 1/0/4
lacp port-priority 32768
lacp timeout short
exit
interface ethernet 1/0/5
lacp port-priority 32768
lacp timeout short
exit
interface ethernet 1/0/6
CTRL+C ESC q Quit SPACE n Next PageENTER Next Entry a All
43-7
This command is used to set the startup configuration file.
boot startup-config {config1 | config2}
Parameters
config1
config2
.
Default
None.
Command Mode
DXS-1210 Series Smart Managed Switch CLI Reference Guide
DXS-1210-12SC 10GbE Smart Managed Switch Configuration
Copyright(C) 2017 D-Link Corporation. All rights reserved.
boot startup-config
The first configuration
The second configuration
Firmware: Build V1.15.003
339