no dhcp retry times
Parameters
<(5-120)>
Default
7.
Command Mode
Global Configuration Mode..
Command Default Level
Level: 12.
Usage Guideline
This command is used to specify the DHCP retry times.
Example
This example shows how to set DHCP retry times.
Switch(config)# configure terminal
Switch(config)# dhcp retry times 10
Switch(config)#
12-6
This command is used to display DHCP retry times.
show dhcp retry times
Parameters
None
Default
None.
Command Mode
EXEC Mode
Any Configuration Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to display DHCP retry times.
Example
This example shows how to display DHCP retry times.
DXS-1210 Series Smart Managed Switch CLI Reference Guide
Specifies the DHCP retry times.
show dhcp retry times
102