Igmp Snooping Commands - D-Link DXS-1210-12TC Reference Manual

20. IGMP Snooping Commands

20-1
This command is used to clear the IGMP snooping related statistics.
clear ip igmp snooping statistics {all | vlan VLAN-ID}
Parameters
all
vlan VLAN-ID
Default
None.
Command Mode
Privileged EXEC Mode.
Command Default Level
Level: 12.
Usage Guideline
This command is used to clear the IGMP snooping related statistics.
Example
This example shows how to clear all IGMP Snooping statistics.
Switch# clear ip igmp snooping statistics all
Switch#
20-2
This command is used to enable the IGMP snooping function on the Switch. Use the no form of this
command to disable the IGMP snooping function.
ip igmp snooping
no ip igmp snooping
Parameters
None.
Default
IGMP snooping is disabled on all VLAN interfaces.
The IGMP snooping global state is disabled by default.
Command Mode
Interface Configuration Mode.
Global Configuration Mode.
Command Default Level
DXS-1210 Series Smart Managed Switch CLI Reference Guide
clear ip igmp snooping statistics
Specifies to clear IP IGMP snooping statistics for all VLANs and all
ports.
Specifies a VLAN to clear the IP IGMP snooping statistics.
ip igmp snooping
145