D-Link DXS-1210-12TC Reference Manual page 99

all
interface INTERFACE-ID
,
-
Default
None.
Command Mode
EXEC Mode.
Command Default Level
Level: 1.
Usage Guideline
This command is used to clear the test results for the cable diagnostics. If the test is running on the
interface, an error message will be displayed.
Example
This example shows how to clear the test results for the cable diagnostics.
Switch# clear cable-diagnostics interface eth 1/0/1
Switch#
DXS-1210 Series Smart Managed Switch CLI Reference Guide
Specifies to clear cable diagnostics results for all interfaces.
Specifies the interface's ID. The acceptable interface will be a physical
port.
(Optional) Specifies a series of interfaces, or separate a range of
interfaces from a previous range. No space before and after the
comma.
(Optional) Specifies a range of interfaces. No space before and after
the hyphen.
96