Creating An Archive With Original Data - Siemens SINUMERIK 840D sl Commissioning Manual

Data backup

15.4 Creating an archive with original data

15.4 Creating an archive with original data
You can select this type of series startup in order to save the original status of the controller.
The files are archived in the "original.arc" file.
The file is stored on the CompactFlash card in the Archives/Manufacturer directory.
If there is no "original.arc" file in the directory, it is recommended that an archive be
generated from the data of the original controller state as delivered.
As with "Create series startup file", control components can be saved individually or jointly.
Requirement
To back up the NC data, you need access rights for protection level 2 (password: Service).
To back up programs/workpieces, you need access rights for protection level 6 (keyswitch
position 1).
146
Press the "New directory" softkey to create a separate directory.
The "New Directory" window appears.
5. Enter the required name and press the "OK" softkey.
The directory is created below the created folder.
6. Press the "OK" softkey.
The "Generate Archive: Name" window opens.
The file type of the archive is ARC and is displayed in the window.
Enter the desired name and press the "OK" softkey.
The archive is generated and stored in the selected directory.
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0
HMI sl (IM9)