License Light - Honda 954 Service Manual

Remove the brakeitail light unit mounting screws.
Pull out the bosses f r o m the grommet, then remove
the brakehail light unit.

LICENSE LIGHT

BULB REPLACEMENT
Remove the screws, packing and lens.
Pull out the license light bulb and replace it w i t h a
n e w one.
Install the license light assembly in the reverse order
of removal.
COMBINATION METER
REMOVAL
Remove the upper cowl (page 2-5).
Remove the bank angle sensor (page 5-86).
Disconnect the combination meter multi-connector.
BOSS
COMBINATION METER
MU LTI-CON NECTOR