Honda 954 Service Manual page 273

If the cam sprockets are removed, install the cam
sprockets onto the camshafts.
Install the intake cam sprocket w i t h the timing mark
(IN) facing outward and the No.1 cam lobes facing
up and out as shown.
.
Install the exhaust cam sprocket with the t i m i n g
mark (EX) facing outward and the No.1 cam lobes
facing up and out as shown.
Clean and apply
bolt threads.
Install the cam sprocket bolts.
Clean and apply a locking agent t o the cam cam pulse
generator rotor threads.
Install the cam pulse generator rotor and mounting
rotor with the
No I camshaft
iobes
facing up
and rotor "OUT"
mark facing down
as shown.
Turn the crankshaft clockwise and align the "T" mark
on the ignition pulse generator rotor w i t h t h e index
mark on the right crankcase cover.
a locking agent t o the cam sprocket
CYLINDER HEADNALVES
NO.l CYLINDER CAM LOBES
INTA K E CAM
SPROCKET EXHAUST CAM SPROCKET
"OUT" MARK
-25