Honda 954 Service Manual page 371

Install a new upper outer race and the ball race
remover as shown.
Hold the driver shaft with a wrench and turn nut A
gradually until the groove in driver attachment A
aligns with the upper end of the steering head. This
will allow you to install the upper outer race.
Install a new lower outer race and ball race remover
as shown.
Holding the driver shaft w i t h a wrench, turn nut A
gradually until the groove in driver attachment
aligns with the upper end of the steering head. This
will allow you to install the lower outer race.
FRONT WHEEL/SlJSPENSlON/STEERlNG
ATTACHMENT
UPPER OUTER
RACE
B
DRIV E R
M E N T
ATTACH
DRIVER SHAFT
\
DRIVER SHAFT
13-29