Honda 954 Service Manual page 430

HYDRAULIC BRAKE
Place a shop towel over the piston.
Position the caliper body w i t h the piston d o w n and
Do not use high
pressure air or apply small squirts of air pressure t o the fluid inlet t o
bring the nozzle
remove the piston.
too close to the
inlet
Push the dust seal and piston seal in and lift t h e m out.
Be careful not to
damage the piston
Clean the seal grooves w i t h clean brake fluid.
I NSPECTIO N
Check the caliper cylinder for scoring or other damage.
Measure the caliper cylinder
SERVICE LIMIT: 38.24 mm
Check the caliper pistons for scratches, scoring or
other damage.
Measure the caliper piston O.D.
SERVICE LIMIT: 38.090
15-26
I.D.
in)
(1.506
PISTON SEAL