Honda 954 Service Manual page 134

FUEL SYSTEM (Programmed Fuel Injection)
PGM-FI MIL 12 BLINKS (No.1 INJECTOR)
Turn the ignition switch to "OFF".
Disconnect the No.1 injector 2P connector.
Check for loose or poor contact on the No.1
injector 2P connector.
Connect the No.1 injector 2P connector.
Place the motorcycle on its side stand.
Turn the ignition switch to "ON".
Check that the MIL blinks.
Turn the ignition switch to "OFF".
Disconnect the No.1 injector 2P connector and
measure the resistance of the No.1 injector.
Connection:
-
(+)
-
Standard: 10.5
14.5
5-26
12 blinks
Normal
Loose or poor contact on the No.1 injector connec-
tor
Abnormal
Faulty No.1 injector