Honda 954 Service Manual page 372

FRONT WHEEL/SUSPENSION/STEERlNG
U.S.A. only:
Replace the steering head bearing outer races using
the special tools listed below.
TOOLS:
Main bearing driver attachment
Fork seal driver body
Oil
seal driver
Installer shaft
Installer attachment A
Installer attachment B
Remover attachment A
Remover attachment
Install the special tools into the steering head pipe as
shown.
Align remover attachment A with the groove in the
steering head.
While holding the installer shaft with the wrench, turn
the upper nut gradually to remove the upper bearing
outer race.
Install the special tools into the steering head pipe as
Be carefui not
to
shown.
drop the attach-
Align remover attachment B with the groove i n the
steering head.
While holding the installer shaft with the wrench, turn
the lower nut gradually t o remove the lower bearing
outer race.
07946-ME90200
07965-MA60000
07VMF-MAT0100
07VMF-MAT0200
07VMF-MAT0300
07VMF-MAT0400
UPPER NUT
\
UPPER BEAR1
OUTER RACE
INSTALLER
ATTACHMENT B
INSTALLER
ATTACHMENT A
UPPER NUT
REMOVER
ATTACHMENT B
O I L SEAL D R ~ V E R
SEAL
FORK
DRIVER WEIGHT
MAIN BEARING
DRIVER ATTACH ME NT
LOWER NUT