Honda 954 Service Manual page 253

CYLINDER HEAD CQVER REMOVAL
Remove the following:
- Lower cowl (page 2-71
- Air cleaner housing (page 5-64)
Remove the heat guard rubber.
Disconnect the fan motor 2P (Black) connector.
Disconnect the cam pulse generator 2P (natural) con-
nector (page 5-83).
Remove the mounting bolt and PAIR control solenoid
valve assembly (page 5-88].
Disconnect the ignition coil sub-harness
connector and sub-harness (page 17-51.
Disconnect the crankcase breather hose.
Remove the throttle cable guide bracket mounting
bolts.
underneath the
Disconnect the throttle cable ends f r o m the throttle
dropping them
into the engine
area
(Black)
4P
CY LlNDER HEAD/VALVES