Apply a thin coat of grease t o the swingarm pivot bolt
surface.
Install the swingarm between the lower bracket and
engine, then install the pivot bolt from the left side.
Install the swingarm pivot nut.
Hold
the pivot bolt using a special tool, tighten the
swingarm pivot nut t o the specified torque using the
same tool.
TOOL:
x
27 m m
Rod holder, 24
TORQUE:
118 N.m (12.0 kgf-m,
Tighten the swingarm pivot pinch bolts t o t h e speci
fied torque.
TORQUE:
26 N * m (2.7 kgf-m,
Install the left main footpeg bracket onto the lower
bracket and tighten the socket bolts t o the specified
torque.
Install the gearshift pedal link (Page
REAR WHEEL/SUSPENSION