Honda 954 Service Manual page 472

TURN SIGNAL
BULB REPLACEMENT
For turn signai
unit
Remove the screw and turn signal lens.
and 2-9
While pushing in, turn the bulb counterclockwise t o
remove it and replace with a new one.
Install the turn signal lens i n the reverse order
removal.
INSPECTION
Turn the ignition switch t o "ON", and check the tail
light operation.
Check that all LED i n the brakehail light unit light o n
w i t h the front brake lever and/or rear brake pedal
applied.
When even any one diode does not turn on, replace
the brakehail light assembly (refer t o next procedure).
Remove the rear cowl (page 2-2).
Disconnect the brakehail light
of
3P connector.
TURN SIGNAL LENS
I
I
SCREW