HYDRAULIC BRAKE
Connect a commercially available brake bleeder t o the
bleed valve.
Operate the brake bleeder and loosen the bleed valve.
If an automatic refill system is not used, add fluid
when the fluid level in the reservoir is low.
Perform the bleeding procedure
completely flushed/bled.
Close the bleed valve and operate the brake lever or
pedal. If it still feels spongy, bleed the system again.
If the brake bleeder is not available, perform the fol-
lowing procedure.
Pressurize the system with the lever or pedal until
there are no air bubbles i n the fluid flowing out of the
reservoir small hole and lever resistance is felt.
the system is
until