Honda 954 Service Manual page 366

Apply fork fluid t o the new O-rings and install them
onto the fork bolt.
Turn the adjusting plate clockwise until
Push down the spring collar, then install the fork bolt
t o the damper rod adjust case while aligning the
groove of the adjusting plate with the damper rod
adjust case.
Hold the damper rod adjuster case, and then tighten
the lock nut t o the specified torque.
TORQUE: 25 N-m
(2.6
seats lightly.
it
19 Ibfmft)
I
ADJUSTING PLATE
ADJUSTING PLATE
DAMPER ROD.ADJUST CASE
DAMPER ROD ADJUST CASE
\