Honda 954 Service Manual page 274

CYLINDER HEAD/VALVES
Apply molybdenum disulfide oil t o the camshaft jour-
nals of
Install the cam chain over the cam sprockets and then
install the intake and exhaust camshafts.
Install each camshaft to the correct location with the
identification marks.
"IN": Intake camshaft
"EX": Exhaust camshaft
Make sure the timing marks on the cam sprockets
are facing outward and flush with the cylinder head
upper surface as shown.
Install the each camshaft holder onto the camshafts.
Install the each camshaft holder to the correct loca-
tions with the identification marks.
"A": Right camshaft holder
"B": Center camshaft holder
"C": Left camshaft holder
Apply engine oil t o the threads and seating surfaces
washers onto of the camshaft holder bolts.
and C's center
Finger tighten the bolts.
shown
-26
the cylinder head and camshaft holder.
INTAKE CAMSHAFT
BOLTS
.