Honda 954 Service Manual page 191

CAM PULSE GENERATOR
REMOVAL/
Remove the air cleaner housing (page 5-64).
Disconnect the cam pulse generator
nector.
Remove the bolt and cam pulse generator f r o m the
cylinder head.
Install the new O-ring onto the cam pulse generator.
Install the cam pulse generator into the cylinder head.
Install and tighten the mounting bolt securely.
Route the cam pulse generator wire properly, connect
the 2P (Natural) connector.
Install the removed parts i n the reverse order of
I.
rem ova
I
2P
(Natural) con-
FUEL SYSTEM (Programmed Fuel Injection)
5-83