FUEL SYSTEM (Programmed Fuel Injection)
Remove the bolts, rear exhaust pipe and gasket.
DISASSEMBLY
Turn the EGCV cable guide pulley counterclockwise,
and seat its tab with the stopper on the valve cover.
Loosen and remove the nut, then remove the valve
cable guide pulley.
Be careful not to damage thrust washer
Do not use any cleaning solution to clean thrust
washer B.
Do not apply any lubricant to thrust washer B.
Remove the following:
-
Spring retainer
- Thrust washer B
-
Thrust washer A
-
Thrust spring
Check thrust washer B for wear or damage.
Replace thrust washer B if it is wear or damage.
Remove the EGCV cover mounting bolts, cable stay,
EGCV cover and metal gasket.
5-98
REAR EXHAUST PIPE
I
B.
THRUST WASHER A
VALVE COVER
N U , T
PULLEY
THRUST WASHER B
SPRING RETAINER
CABLE STAY
B O LTS