Honda 954 Service Manual page 47

Remove the t w o trim clips.
Remove the screws, special screws, setting bolts, COI-
lars and spacers.
Push down the pillion seat mounting bracket and
carefully spread the bottom of both sides of the rear
cowl, then remove
Disconnect the tail light connector.
IN STALLATION
PILLION
from the seat rail.
it
FRAME/BODY PANELS/EXHAUST SYSTEM
SETTING BOLT
SPECIAL-SCREWS
1.5 N - m (0.15 kgfom, 1.1 IbfW
SCREWS
2-3