Install the thrust washer and gearshift spindle assem-
bly into the crankcase while aligning the spring ends
with the crankcase stopper pin.
Install the gearshift pedal link aligning its slit with the
punch mark on the gearshift spindle.
Install and tighten the pinch bolt to the specified
torque.
TORQUE:
Install the clutch assembly (page
RIGHT CRANKCASE COVER INSTALLATION
Apply sealant
as shown.
Apply sealant t o the mating surface of the right
crankcase cover.
(1.0 k g f m ,
7 Ibf-ft)
the mating surfaces of the crankcase
to
9-17