Honda 954 Service Manual page 156

FUEL SYSTEM (Programmed Fuel
PGM-FI MIL 33 BLINKS (E2-PROM)
Turn the ignition switch t o
Disconnect the ECM connectors.
Check for loose or poor contact of the ECM con-
/
Connect the ECM connectors.
Short the service check connector with a jumper
wire (page 5-6).
Turn the ignition switch t o "ON" and check that
the MIL blinks.
I
Remove the jumper wire f r o m the service check
connector.
Turn the ignition switch t o
the MIL blinks.
Injection)
"OFF".
Except 33 blinks
"ON" and check that
33 blinks
33 blinks
Reset the self-diagnosis memory data (page 5-7).
Turn the ignition switch to "ON" and check that the
MIL blinks.
I
Does not blink
33 times
Does not blink
33 times
No problem
I I
I
Replace the ECM
I
33 blinks