Starter Motor - Honda 954 Service Manual

ELECTRIC STARTER
STARTER MOTOR
REMOVAL
Drain the coolant (page
Remove the throttle body (page 5-67).
Remove the thermostat housing (page 6-7).
With the ignition switch turned t o "OFF", remove
negative cable at the battery before servicing

starter motor.

Remove the rubber cap.
Be careful not to
Remove the nut and the starter motor cable f r o m
hose.
Remove the starter
cable.
Pull the starter mot
DISASSEMBLY
Remove the following:
-
O-ring
- Starter motor case bolts/O-rings
- Front cover
- Seal ring
- Lockwasher
- Insulated washer
- Shim(s)
Record the h a -
and number
o f
shims.
motor mounting bolts and ground
or out of the crankcase.
STARTER MOTOR CABLE
the
the
the
SEAL RING
SHIMS
O-RING
CASE BO&O-RINGS
FRONT COVER