CY LlNDER HEAD/VALVES
Turn the crankshaft clockwise, align the
the ignition pulse generator rotor w i t h the index mark
on the right crankcase cover.
Make sure the No.1 piston
on the compression stroke.
Remove the cam chain tensioner lifter sealing bolt
and sealing washer.
Turn the tensioner lifter shaft fully in (clockwise) and
secure it using the cam chain tensioner holder.
TOOL:
Cam chain tensioner holder
Remove the bolts and cam chain guide B.
-8
"T"
mark on
is
at TDC (Top Dead Center)
(U.S.A. only)
CAM CHAIN TENSIONER LIFTER
CAM CHAIN TENSIONER HOLDER
BOLT
\
SEALING WASHER