Honda 954 Service Manual page 362

FRONT WHEEL/SUSBENSION/STEERlNG
Place the fork pipe in V-blocks and measure the
runout.
Actual runout is 1/2 the total indicator reading.
SERVICE LIMIT: 0.20
Fork pipe bushing
Visually inspect the slider and fork pipe bushings.
Replace the bushings if there is excessive scoring or
scratching, or if the teflon is worn so that the copper
surface appears on more than 3/4 of the entire sur-
face.
Check the back-up ring; replace it if there is any dis-
tortion at the points shown.
ASSEMBLY
3-20
mm
(0.008 in)
I I P C
\
CHECK P OINTS
COPPER SURFACES