Install the main journal bearings into the upper and
The bearing tabs
should be abgned
lower crankcase.
with the grooves
in the case.
Apply 'molybdenum disulfide oil t o the upper and
lower main journal bearings.
Install the crankshaft.
Before instaaiia-
the pistons at
TDC (Top Dead
Center) to prevent
damaging the
connecting rod
threads
Install the connecting rod bearing caps.
Apply oil t o the connecting rod bearing cap nut
threads and seating surfaces.
Install and tighten the nuts gradually and alternately.
TORQUE:
Assemble the upper and lower crankcase (page 11-12).
TRANSMISSION
Separate the crankcase halves (page 71-31.
Remove t h e mainshaft a n d countershaft as
assembly.
35
(3.6
a n