Honda 954 Service Manual page 289

Align the primary drive gear and sub-gear teeth w i t h
a screwdriver as shown.
Pull out the clutch outer.
Remove the oil p u m p driven sprocket bolt/washer.
Remove the oil p u m p drive/driven sprocket and drive
chain as an assembly.
Remove the clutch outer guide.
INS PECTl ON
Clutch lifter bearing
Turn the inner race of the lifter bearing w i t h your
finger.
The bearing should turn smoothly and freely without
excessive play.
Clutch spring
Measure the clutch spring free length.
SERVICE LIMIT: 47.4
9-6
mm (1.87 in)
PRIMARY DRIVE GEARISUB-GEAR
CLUTCH OUTER
LIFTER -BEARING