Remove the three SH bolts and drive chain slider.
Check the drive chain slider for wear or damage.
Remove the pivot collar and dust seals f r o m the
swingarm left pivot.
Check the dust seals and collar for damage or fatigue.
Remove the side collar and dust seals f r o m the
swingarm right pivot.
Check the dust seals and side collar for damage or
fatigue.
Turn the inner race
of
right pivot bearings with y o u r
fi
nqer.
The bearings should turn smoothly and quietly. Also
check that the bearing outer race fits tightly in
hub.
Remove and discard the bearings if the races do n o t
turn smoothly and quietly, or if they
pivot.
the
fit loosely i n t h e
I
BEA R IN G
REAR WHEEL/SUSPENSION
'\A-
&
&
:
\
14-17