Pull the brake/taillight bulb out of the socket and re-
place it with a new one.
Install the socket by turning it clockwise.
Install the seat (page 2-2).
LICENSE LIGHT
BULB REPLACEMENT
Remove the following:
-two nuts and collars
-bolts, wire clamp and washers
number plate bracket from the rear fender
-two nuts
lens, lens cover and license light base from the
number plate bracket
While pushing the bulb in, turn it counterclockwise
to remove it, and replace it with a new one.
Make sure that the seal rubber is installed in
position and is in good condition, and replace it
with new one if necessary.
Install the removed parts in the reverse order of
removal.
LIGHTS/METERS/SWITCHES
19-5