Honda 954 Service Manual page 214

FUEL SYSTEM (Programmed Fuel Injection)
Install air guides A and 8, then tighten the mounting
screws.
Install the intake valve shaft holder plate with its
"UPPER" mark facing up.
install and tighten the mounting screws.
Open the intake valve flap by hand, connect the intake
valve control cable end t o the drum.
Turn the return spring end counterclockwise turn and
then install
Face
the control Tighten the cable lock nut securely if
cable
to the /eft,
then tightening
the lock nut
Install the air cleaner housing (page 5-65),
Adjust the variable air intake valve control cable
(page 5-94).
5-106
onto the hook as shown.
it
AIR GUIDE A
CONTROL CABLE
I
it is removed.
CONTROL CABLE
ASSEMBLY
DRUM SPRING END
INTAKE VALVE CABLE ADJUSTER
B
AIR GUIDE
SCREWS
VALVE FLAP