Honda 954 Service Manual page 241

ENGINE RE M OVAL/I NSTALLATION
Hold the rear engine hanger socket bolt, then tighten
the nut t o the specified torque.
TORQUE: 54 N-m (5.5 kgf-m, 40 Ibf-ft)
Tighten the rear engine hanger pinch bolt t o the spec-
ified torque.
TORQUE: 26 N-m (2.7 kgf-m, 20 Ibfoft)
Tighten the left side o f the front (10 mm) and middle
(12 mm) engine hanger bolt t o the specified torque.
TORQUE:
Front (10 mm):
Middle (12 mm): 54 N-m (5.5 kgf-m,
Tighten the right side o f the front (10 mm) and middle
TORQUE:
Front (10 mrn):
Middle (12 mm): 54 N-m (5.5 kgf-m, 40 Ibfoft)
7-8
39 N-m (4.0 kgfarn, 29 Ibfoft)
40 Ibfmft)
39 N-m (4.0 kgf-m, 29 Ibf-ft)